Best CNC Machine for Small Business

Here I have listed the Best CNC Machine for Small Business.

Here I have covered different categories of CNC Machine which are perfect for Small Business.

Hence, it will helpful if you’re looking for a Small Business CNC Router for Woodworking.

If you are a beginner then here is the solution for you too which will help you in doing small business.

Apart from this, I have also talked about the best Budget, Hobby Craft and best High- end CNC Machine here which can help in small business.

Let’s dive right in.

Recommended readings:
Best CNC Machine for beginner.
Know more about best CNC router which are good for small business.
Learn about Home CNC Machine.

Best CNC Machine for Small Business- Different categories

#1 Genmitsu CNC 3018-PRO (Best Budget)

Features & Specs

  •  Effective Engraving Area : 300 x 180 x 45 mm(11.8 x 7.1 x 1.8”)
  • Frame Size : 400 x 330 x 240 mm(15.7 x 13.0 x 9.4″”)
  • Frame Material : PF+ Aluminum
  • Z-Axis Component Material : Nylon
  • Spindle :775 motor, 24V, 10000 RPM
  • Rated power : 60W; Maximum power: 120W
  • Step Motor : 1.3 A, 12V, 0.25 Nm torque (2.2 in lb)
  • Drill Bits :Tip 0.1 mm, 20 degree, Diameter 3.175 mm
  • Supported OS : Windows XP, Windows 7, Windows 8, Windows 10, MAC OS
  • Software : Grbl control(Candle)
  • Power Supply : 24V/5A

The Genmitsu CNC 3018-PRO is an improved version of the Genmitsu CNC 3018.
Let’s know more about this small machine.

The Bad

Large projects are not suitable
This is a small CNC. It’s an ideal machine for first-time CNC users and those working on little tasks.

The good

Capability
This machine can cut all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs. You can use the Genmitsu on a wide range of tasks and materials, not just little ones.

Controller
This machine uses GRBL, a high-performance open-source software which controls movement, and runs on Arduino.

GRBL has a lot of resources available to help if you get stuck.
CARVECO Maker CAM Design Software and CANDLE are included, allowing you to control your machine and run your GCODE design files.

Engraving depth
It has a 1.8-inch engraving depth that is effective.
For better stability, the machine’s base height has been adjusted to 4cm.
I like one thing that this tool is self-teaching so you can test out your DIY ideas without having to invest a lot of money.

Assembly
The assembly of this tool is not so easy. But don’t worry the tool comes with a mini-CD you can watch as you install. Or you can use a PDF tutorial.
You have to download  a manual from Sainsmart Wiki.

With this upgraded version it is not necessary to place all of the components.

Mobility
This tool is small and portable so you can move it for any location.

What do I love the most?

This machine comes with a high level of accuracy that’s perfect for your woodworking projects.
If you are a beginner then this is for you.

So this small tool allows you for a small project or a business at a lower price.

Quick check:

Good 

  • It provides durability and stability
  • This tool has a reasonable price.
  • You can add a laser module
  • Good for beginner

Bad:

  • Large projects are not suitable.

#2 BobsCNC Evo 4 (Best Woodworking & High-End)

Features & Specs

  • Manufacturer : BobsCNC, LLC
  • Part Number : Evolution4
  • Product Dimensions : 32 x 39 x 20 inches
  • Power Source: Ac
  • Voltage: 110 Volts (AC)
  • Item Weight: 42 Pounds
  • Color: ‎Baltic Birch
  • Wattage : 600 watts
  • Torque : 75 Inch Ounces
  • Performance Description : 24″” x 24″” x 3.3″” Cutting Volume
  • Measurement System : Inches or mm
  • Included Components : Makita RT0701C Router 1/4″” collet

The BobsCNC E4 is capable of working on a variety of materials, including wood, big sheets of plywood, and aluminium.

The  Bob CNC is suited for heavy-duty engraving and construction.

You can use this tool for cutting and engraving wood and plastics

The Bad

It takes time to assemble

It does not come assembled, and unlike other versions, assembling it may take some time.

The good

Built quality
The cutting area and assembled footprint are significantly larger.
It has many of the same characteristics as the E3 like an SG20U supported rail system, a laser-cut frame, and GT2 belt drive on both the X and Y axes.

This is a sturdy tool.

Controller
The DeWalt router is the cutting tool for this tool.
The bits, on the other hand, must be purchased individually.
This router works with Linux, Mac OS X, Windows, and nearly every other CNC software.
It does not come with a free software version, unlike the other routers..

However, if you like, you can use the open-source GRBL.

Capability
The huge  work surface allows you to engrave larger pieces of wood.
With the latest Arduino Uno, you can carve a design on larger sheets and finish your project quickly.


Assembly
It does not come assembled, and putting it together may take a little longer than with other versions.
But don’t worry , you will get a handbook which is informative and user-friendly. So the company will help you whatever your situation.

What do I love the most?

If you have a lot of operations in your small woodworking shop, this will be beneficial to you.
However, this tool is a little expensive.
Quick check:

Good 

  • The tabletop and frame are both quite sturdy.
  • Easy to control
  • Easy to move

Bad

  • It takes time to assemble

#3 SainSmart Genmitsu CNC Router (Best for Hobby Craft)

Features & Specs

  • Effective Engraving Area : 260 x 155 x 35mm(10.2 x 6.1 x 1.4”)
  • Frame Size : 400 x 330 x 240mm(15.7 x 13.0 x 9.4”)
  • Frame Material : Aluminum
  • Z-Axis Component Material : ABS
  • Spindle : 775 motor, 12V~24V, 10000 RPM;
  • Rated power : 60W; Maximum power: 120W
  • Step Motor : 1.3 A, 12V, 0.25 Nm torque (2.2 in-lb)
  • Drill Bits : Tip 0.1 mm, 20 degrees, Diameter 3.175 mm
  • Supported OS : Windows XP, Windows 7 32/64 bits, Windows 8, Windows 10, Linux, MAC OS
  • Software : Grbl control(Candle)
  • Power Supply : 24V/5A, with CE, FCC & PSE certifications

SainSmart Genmitsu 3018-PROVer is a small CNC machine.
This Pre-assembled unit is very easy to use.

The Bad

Replacement parts are not available
In this machine you can not replace the parts meaning the company doesn’t sell the replacement parts.

The good

Built quality
It has an aluminum body which provides stability to milling a wider range of materials.

Also it has acrylic safety baffles to help trap dust and provide a safety barrier.

Working area of this machine is 300 x 180 x 45.

Controller
You can easily control your CNC machine.

The1.8″ monitor provides clear readouts and manual control of your mill without using a computer.

Sometimes the project gets out of hand, which can create a bigger problem or loss. But this PROVer has an emergency stop button that allows you to shut down your machine immediately.

This noticeable button is easy to use. 

You have to use CAD/CAM software to design and then transform your ideas into GCode instructions that the router can read and recognize.

A laser engraver addition to the motor-head can be used for adjustment.
It becomes an even more handy CNC machine for your home shop with this laser engraver attachment. as you can swap out the CNC router for all of your engraving needs.

Assembly
This unit comes with pre- assembled.
It is one of the simpler CNC machines to put together because it comes as a CNC kit.

What do I love the most?

It provides a cost-effective entry point for anyone wishing to expand their small business and work on a variety of projects.

Quick check:

Good 

  • Upgrading to a laser engraver is available as an option.
  • Affordable
  • It allows you to work with a variety of materials.
  • Easy to use and set up

Bad

  • You can not replace the machine parts

#4 Mcwdoit Upgraded Version 3018 Pro ( Best Entry-level Machine)

Features & Specs

  • Brand: Mcwdoit
  • Material: Aluminum
  • Operating System: Windows XP, Windows 8, Windows 7, Mac, Windows 10
  • Compatible Material: Wood, Aluminum, Plastic, Metal, Copper, Acrylic
  • Product Dimensions: 11.81 x 7.09 x 1.77 inches
  • Item Weight: 16.15 pounds
  • Engraving Area: 30184.5cm (11.87.11.8″)
  • Workpiece thickness: 1.77″
  • Spindle: 775 type, 10,000 RPM
  • OS compatibility: Windows, Linux

This Mcwdoit Upgraded Version comes with a new control board which is designed to prevent the router from short circuiting.

Also the parts come with Pre-assembled for your comfort.

The Bad:

A lot of metal shavings remain in the bracket.
You have to clean up the shavings, and make sure there are no blocks or shorting problems.

The good

Offline facility and other features
You can use this router offline. Simply download all important files on a USB drive, attach the drive to your offline connection.

This unit comes with an SD card reader to write into the root directory G-code files or NC file.

It allows you to manually adjust the X, Y, Z axis to set the beginning point for engraving, and manually open and close the spindle.

Extensive use
This unit can carve  plastic, wood, acrylic, PCB CCL, soft metal like copper and aluminum. However you can not carve jade and  other materials with a very hard texture.


Perfect for Desktop
This router is a regular size and this makes it suitable for desktop use specially for your small workshop.

Easy assemble
The instructions are easy to follow as most are explained with pictures.


You can take print out from PDF which is available in CD. so you can see the small pictures more easily.

Wiring is really simple with all the pre-built connectors.


Good for beginner
This tool is very good for a beginner to learn.

Enough workspace
You will have plenty of space to work with woods, PCB CCI, plastic, soft metals, and acrylic with this machine.

The motor works well if you use the right bit and settings.

What do I love the most?

One thing I liked about this router is that you can use it offline.

Quick check:

Good 

  • Affordable price
  • Easy to install

Bad

  • Assembly process takes time.

Leave a Comment